Mycelium-based materials are attracting increasing attention as sustainable alternatives to plastic and foam packaging.

By growing mycelium on agricultural by-products, companies can produce lightweight and biodegradable materials suitable for protective packaging and insulation.

Recent developments show growing interest from manufacturers and packaging companies looking to reduce their environmental footprint. As production techniques continue to improve, mycelium materials could become a scalable and circular solution for industries seeking more sustainable packaging options.

Source: Check out the latest trends on Towards Packaging!

Artificial intelligence is increasingly finding its way into mushroom cultivation. A Canadian startup is experimenting with mushroom production inside climate-controlled shipping containers equipped with advanced monitoring and automation systems.

By combining AI-driven climate control with real-time data analysis, the system continuously adjusts temperature, humidity and airflow to optimise growing conditions. The goal is to improve yield consistency while reducing labour and energy use.

Modular container farms also allow mushrooms to be grown closer to urban markets, shortening supply chains and enabling year-round production. As digital technologies continue to evolve, AI-supported cultivation systems could become an important tool for the next generation of mushroom farms.

Source: Verticalfarm Daily

?   Location: The Netherlands
? Company: Christiaens Group
 

Christiaens Group, a leading supplier of turnkey solutions for the mushroom cultivation and composting industry, is looking for a driven International Account Manager to strengthen its global sales team.

In this role, you will build and maintain relationships with international clients, explore new market opportunities and represent Christiaens at international trade shows and customer visits.

The position combines commercial responsibility with technical insight, translating customer needs into tailored solutions for projects in mushroom cultivation, composting and emerging sectors such as circular production and mycelium-based materials.

The role involves working closely with engineering, service and project management teams while travelling internationally approximately 30–40% of the time.

View the full vacancy on LinkedIn

Researchers are exploring new ways to unlock the valuable bioactive compounds found in mushrooms. 

A recent project in New Zealand has developed an innovative fermentation method that can extract compounds from shiitake mushrooms far more efficiently than traditional approaches.

Instead of lengthy processing times, the technique allows concentrated bioactive ingredients to be produced within weeks. These compounds are widely used in nutraceuticals and functional foods, potentially opening new opportunities for high-value mushroom ingredients and export markets.

Source: Indian Newslink

Deep in the forests of Estonia, a small family-run company is gaining remarkable traction in the rapidly growing functional mushroom market. Musheez, based in the village of Pillapalu, has recently been recognised as Estonia’s fastest-growing food supplement company.

The company supplies certified organic mushroom extracts and ingredients to around 60 brands across more than 30 European countries. Its growth reflects the rising global demand for functional mushroom products, with the mushroom supplements market projected to reach USD 33.31 billion by 2029.

At the same time, the European regulatory landscape remains complex. Recent enforcement actions by the UK Food Standards Agency have highlighted the challenges companies face when bringing functional mushroom products to market.

Source: Mycostories

As already announced, Mush Comb will be exhibiting at the upcoming Mushroom Days. They are looking forward to welcoming you at Stand no. 6.16!

Are you considering upgrading your equipment? Would you like to trade-in your old machines and switch to modern solutions with the latest design and features?
Then don’t forget to bring some pictures of your current equipment, so they can explore the opportunities together directly at our stand.

Feel free to contact them in advance to schedule a meeting.

They are also pleased to invite you to Mushroom Days Network Party, taking place after the first day of the fair on Wednesday, 22 April 2026, from 17:00 to 22:00 hrs, in the Bosch Rooms of Brabanthallen. This recently completed and modern venue is located right opposite the exhibition entrance, the perfect place to close the first day of the fair in a relaxed and friendly atmosphere.

? Please register via this link: Network Party
?️  Kindly note that registration is open until 13 April 2026.

MushComb is looking forward to seeing you there!

The market for functional mushrooms continues to expand rapidly, with increasing demand for ingredients such as lion’s mane, reishi and cordyceps in supplements, foods and beverages. 

To support this growth, US-based ingredient supplier M2 Ingredients has opened a new Center of Innovation dedicated to developing mushroom-based consumer products.

The facility brings together expertise in cultivation, extraction and formulation, helping brands overcome challenges such as flavour integration, solubility and product stability. By bridging the gap between mushroom cultivation and food technology, the center aims to accelerate the development of new functional mushroom products.

Source: Nutraceutical Business Review

Causal Organism

Several strains of Trichoderma spp. have been associated with the commercial production of A. bisporus. Some are found as a weed or indicator mold that signals a composting or casing pH problem (Wuest, 1982). In the late 1980s, a new, more pathogenic strain was reported in Ireland and the UK, Trichoderma harzianum (Th2 and Th4).  During the 1990s, it spread to Canada and the United States and eventually has been found worldwide in many mushroom-growing operations, and is now classified as Trichoderma aggressivum f. aggressivum (Ta2). This aggressive strain causes the disease known as Trichoderma Green Mold. This pathogenic strain has been found only on mushroom farms. Trichoderma Green Mold spreads throughout mushroom crops and farms through vegetative growth and the production of conidiospores.

Signs and Symptoms

Trichoderma mycelium grows as a grayish color and then changes to white, becoming very dense. Growth during the spawn growing is difficult to discern from the mushroom mycelium.  Once it begins to form spores, it turns dark green (Figure 1).  Green Mold mycelium grows in the substrate, and the casing aggressively competes with the mushroom mycelium. Often, little to no mushroom mycelium is found in areas heavily colonized with Trichoderma.

Other Trichoderma species will not cause the disease and only through extensive taxonomic examination or with PCR can they be differentiated from Ta2.  However, if Green Mold rapidly grows across the growing surface or is found in the compost below, it is most likely the aggressive Trichoderma Green Mold, Ta2.  Another sign of Ta2 infestation is the presence of pygmy mites, though this is not always true, as they feed on other fungal molds that grow in the mushroom substrate.

The mechanism of pathogenesis of Trichoderma Green Mold on mushrooms is not completely known.  Some Trichoderma spp. produce toxic metabolites that inhibit the growth of other organisms, and some species can parasitize the mycelium directly.  Most evidence so far suggests that Ta2 produces metabolites that inhibit the growth of A. bisporus (Mumpuni, et al., 1998, Krupke, et al., 2003). Electron microscopic observations of the interaction between Green Mold and mushroom mycelium did not show any obvious pathogenicity (Anderson, et al., 2001).

Disease Development

Disease severity or timing of the disease signs and symptoms on a farm may be related to several different circumstances or combinations of these factors. The number of spores and the timing of infection determine when Trichoderma Green Mold will first appear in a crop. An early infestation and/or a high spore load at spawning will result in early signs of the disease, and the severity will most likely be serious. Whereas a later infestation, as before or at casing or a low spore load, will result in the disease developing at or after 1^st break and usually with less severity.

Observations made over the years at farms in Pennsylvania and elsewhere have suggested that certain mushroom composting (Phase I and/or Phase II) conditions were often associated with Trichoderma Green Mold disease development.  The occurrence of Trichoderma in farms with high sanitation levels appears to be associated with compost that is not nutritionally selective for the mushroom mycelium. Wet compost, which was poorly aerated during Phase I and/or Phase II, is often associated with increased disease severity or incidence on the farms.  Both H. Grogan (personal communication) and Beyer (2008) reported that compost prepared under low-oxygen conditions was more susceptible to disease development.  Under these low-oxygen, or anaerobic, conditions, bacteria produce organic acids, which may persist during the substrate preparation process and remain residual after it, when the mycelium of A. bisporus is seeded into the substrate.  It has been reported how organic acids encourage the growth of T. aggressivum (Figure 2). 

Therefore, the compost's susceptibility and spore load may determine when the disease develops and how severe it may be. Figure 3 shows the relationship between spore load and the susceptibility of compost. So, a well-conditioned substrate with proper moisture may be less susceptible, but with a high spore load at infection, the disease could develop relatively early, with possible mild to high severity.  That same scenario may occur with a low spore load infecting a highly susceptible compost.

The spawn grains also play an important role in the initial infection of a crop.  The grain carrying the mushroom mycelium appears to be a good source of food or may stimulate Trichoderma spore germination. Protecting the spawn grain with fungicide or using a non-grain spawn reduces the early disease development and severity.

Trichoderma spores introduced onto a fully colonized substrate tend not to cause serious disease.  However, bulk spawn run compost (Phase III compost) that is broken up when filling a truck or when placed on farm shelves can be very susceptible to Trichoderma infection.  It is assumed that the sugars and carbohydrates within the mushroom mycelium are released when it is broken up, and that these carbohydrates are a readily available source of food for Trichoderma.

Once Trichoderma mycelium begins to grow, it will quickly spread through the compost and casing, and the A. bisporus mycelium will no longer be able to grow there. Trichoderma will spread across the growing surface and continue to sporulate, producing as many as 1,000,000 spores per 1 gram of casing in as little as 24 hours. These spores then serve as inoculum for the next crop or for new rooms.

Control

Disease control depends primarily on reducing or eliminating spores through sanitation and vector control. Trichoderma spores are vectored around the farm in many ways. The spores can adhere to employees, their clothing, and the farm's equipment. Flies, mites, and rodents can also spread the spores. Mites are good secondary vectors because they have specialized structures, called sporangia, that carry and spread spores.

Wooden shelves and trays in crops heavily infested with Trichoderma Green Mold can become impregnated with the Trichoderma mycelium, (Figure 4).  If post-crop steaming and Phase II pasteurization are insufficient, that mycelium will be a source of infection in the subsequent crop planted in that room. In addition, Trichoderma spores may survive lower temperatures or shorter post-crop steaming times and infest subsequent crops. A proper Phase II pasteurization with good ammonia concentrations in the air and substrate appears to be effective in killing the spores.

Using a mapping technique to monitor Trichoderma spots after casing through cropping may help determine the source of infection. By monitoring the number and location of the infections, it may be possible to detect a pattern or time of infection.  Improperly sanitized spawning equipment may show up if the disease has its highest incidence in the area where the spawning crew starts or in the first trays to be spawned. Mapping the movement of compost from a bulk tunnel into the farm's shelves may also reveal a pattern of infection during tunnel spawning (Obrien et al., 2017). High Trichoderma counts in rooms or areas with the highest fly populations could indicate that spores are entering with flies (Coles et al. 2021). It has also been reported that shelves filled by hand had a higher incidence of Trichoderma in the lower beds than rooms filled with nets (Coles et al., 2024).  They related this pattern to employees having to step from the floor into the lowest bed while filling it.

Equipment and personnel from infested crops should be prevented from entering the spawning or casing areas during those operations. Additional steps, such as issuing new uniforms daily to spawning personnel and separating cafeterias and break rooms for employees working in the spawning and casing areas, are effective.

Although Trichoderma spores are not easily airborne, dust particles and flies can carry them, so filtration and air pressure during the spawning and casing operations are critical. Maintaining positive pressure in a spawning area or room would help reduce the risk of contaminants from vectors contaminating a fresh substrate.

To reduce the spread of spores within an infected crop, cover all spots of Trichoderma with either salt, hydrated lime, gypsum, or alcohol.  Whatever is used should cover several inches beyond the infected area.  Usually, the substrate under the infected area is greater than what is seen on the casing, so extending the covering material beyond what is seen will help prevent new areas from developing from the infected substrate below.

Existing registered chemical fungicides are ineffective in reducing or eliminating actively growing Trichoderma mycelium once it is established in the compost or casing.  Control is primarily good composting, complete pasteurization, a complete sanitation program, especially at spawning, and efficient post-crop steaming procedures. If this disease gets out of control, it is better to steam off the crop early to reduce the spore inoculum that could spread to subsequent crops.

References

Anderson, M. G., D. M. Beyer, and P. J. Wuest. 2001. “Yield Comparison of Hybrid Agaricus Mushroom Strains for Resistance to Trichoderma Green Mold.” Plant Disease 85: 731–734.

Beyer, D., K. Paley, J. Kremser, and J. Pecchia. 2008. “Influence of Organic Acids on the Growth and Development of Trichoderma aggressivum, a Pathogen of Agaricus bisporus.” Pages 540–555 in Science and Cultivation of Edible and Medicinal Fungi: Mushroom Science 17, edited by Van Gruening. Pretoria, South Africa: South African Mushroom Farmers Association. Proceedings of the 17th International Congress, Cape Town, South Africa, May 20–24 (CD-ROM).

Coles, Phillip S., Maria Mazin, and Galina Nogin. 2021. “The Association Between Mushroom Sciarid Flies, Cultural Techniques, and Green Mold Disease Incidence on Commercial Mushroom Farms.” Journal of Economic Entomology 114 (2): 555–559. https://doi.org/10.1093/jee/toaa322.

Coles, Phillip S., Milton E. McGiffen Jr., Huaying Xu, and Moises Frutos. 2024. “Compost Filling Methods Affect Green Mold Disease Incidence in Commercial Mushrooms.” Plant Disease 108 (3): 666–670. https://doi.org/10.1094/PDIS-06-23-1101-RE.

Krupke, Oliver Albert, Alan J. Castle, and Danny Lee Rinker. 2003. “The North American Mushroom Competitor, Trichoderma aggressivum f. aggressivum, Produces Antifungal Compounds in Mushroom Compost That Inhibit Mycelial Growth of the Commercial Mushroom Agaricus bisporus.” Mycological Research 107 (12): 1467–1475.

Mumpuni, A., H. S. S. Sharma, and A. E. Brown. 1998. “Effect of Metabolites Produced by Trichoderma harzianum Biotypes and Agaricus bisporus on Their Respective Growth Radii in Culture.” Applied and Environmental Microbiology 64 (12): 5053–5056. https://doi.org/10.1128/AEM.64.12.5053-5056.1998.

O’Brien, M., K. Kavanagh, and H. Grogan. 2017. “Detection of Trichoderma aggressivum in Bulk Phase III Substrate and the Effect of T. aggressivum Inoculum, Supplementation and Substrate-Mixing on Agaricus bisporus Yields.” European Journal of Plant Pathology 147 (1): 199–209. https://doi.org/10.1007/s10658-016-0992-9.

Wuest, Paul J., and Glenn D. Bengtson, eds. 1982. Penn State Handbook for Commercial Mushroom Growers: A Compendium of Scientific and Technical Information Useful to Mushroom Farmers. University Park, PA: The Pennsylvania State University, College of Agricultural Sciences.